Moglice Forms Micron-Exact …

 

… any type of slideway for new production or overhaul. It can be puttied, poured or injected and is the essentially price worthier than any conventional system.

 

The result is:

 

 •  1:1 correct to the micron with high wear resistance

 •  easily coated with perfect long term adhesion (>45 years of experience)

 •  best damping properties = improvement of stiffness

 •  scatter-free start = optimized Anti Stick-Slip behavior

 

Fields of Application:

 

 •  Round bushings

 •  slide bearings of any kind in large machine tools

 •  hydraulic pistons

 •  keyways

 •  column ways

 •  carriage slideways

 •  tooth racks

 •  ram guides

 •  hydrostatic guides

 •  support guideways

 •  aerostatic bearings

 •  deep hole bushings

 •  and many more guideways

 

DIAMANT moglice enables dynamic elements, e.g. slideways to run easily, protects from wear & tear and lowers buying as well as running costs. High wear resistance and improved stiffness are just 2 highlights of DIAMANT moglice.

 

Metal, what else do you need?

 

DIAMANT moglice mouldable low friction wayliner does not change its Anti-Stick-Slip-behaviour even under unfavourable conditions like lacking lubrication or high loads. The combination cast iron/moglice shows a friction value at rest of just 1/7 of the conventionellen combination cast iron/ steel.

 

Survey of further benefits:

 

 •  applicable in place without special knowledge,

 •  high dimensional stability, shrinkless cure (hardly measurable) with best precision

 •  optimum adhesion (individual coatings),

 •  wear proof even after decades

    (since 1963 in hard industrial usage)

 •  easily moulded or injected.

    Ready! – after cure.

 •  rational & rapid,

    with high long term results.

 

There is always an exact moulding from the precision ground bred- counterways after alignment.

 

The Consequences:

 

Excellent running properties, free of Stick-Slip with high stability and hardly measurable wear.

 

DIAMANT Moglice has been used Worldwide …

 

by leading machine makers, machine tool builders with the

 

 •  putty moulding method

 •  injection method

 •  for new and new way constructions and overhauls

Example: 48" Length x 5" Width x .062"

Thickness = 14.88 cubic inches x 33 (FL/P)

= 491 Grams of Moglice Needed

To Find the

Grams of

Moglice

Required:

33 = Moglice FL/P

36 = Moglice P-500

37 = Moglice 628

41 = Moglice Putty Hard

39 = Moglice 1000 Semi

37 = Moglice 1000 Fluid

Length: X

Width: X

Thickness: X

Moglice: =



GRAMS NEEDED   

KEEP UP WITH US

ON SOCIAL MEDIA

DEVITT MACHINERY COMPANY

3345 Market Street
Aston, PA 19014

Phone: 610-494-2900

Toll-Free: 1-877-368-1528

Copyright © 2018.  All rights reserved.  Site Design: BLH MEDIA

HOME

CONTACT

BLOG